Filter
Top Products
Remote Commands
C-74 GB1400 User Manual
TEST Setup Commands
test_discard
Test Discard. This command discards all results from the previous test interval, making
previous results unavailable until the next test state RUN to STOP transition occurs.
Min. Abbr. test_d
Arguments none
Example test_discard
test_length [t]
Test Length. Sets the test length to the time specified in the string "s". The string will be
in 24-hour format "HH:MM:SS" enclosed in single or double quotes. This command sets
the timed test interval. This interval will be in effect only when the test mode is timed or
repeat.
Min. Abbr. test_l
Arguments t <qstring>, in format "hh:mm:ss", where hh = hours
(0 to 24) mm = minutes (0 to 59), ss = seconds (0 to 59).
Example test_length "02:00:00"
test_length?
Test Length Query. Returns the current value of the timed test length parameter.
Min. Abbr. test_l?
Returns <qstring>, in format "hh:mm:ss"
Example test_length? (command)
TEST_LENGTH "02:00:00" (response)