Filter
Top Products
Remote Commands
C-86 GB1400 User Manual
Audio Beeper Setup Commands
audio_rat_up and
audio_rat_dn
Audio Rate Up/Down (Default). This command pair is used to increment
(audio_rat_up) or decrement (audio_rat_dn) by one the exponent of the current error rate
threshold of the BER beeper.
Min. Abbr. audio_rat_u
audio_rat_d
Arguments none
Example audio_rat_up
This command adds one to the exponent of the beeper BER
threshold.
audio_rat_up [v] and
audio_rat_dn [v]
Audio Rate Up/Down. This command pair is used to increment (audio_rat_up) or
decrement (audio_rat_dn) the exponent of the error beeper BER threshold by an amount
v. Note that because the exponent is negative, the audio_rat_up command decreases the
BER threshold while audio_rat_dn increases the threshold.
Min. Abbr. audio_rat_u
audio_rat_d
Arguments v: 1, 2, 3, ..., 14.
Example audio_rat_up 9
The above example adds 9 to the exponent, for example changing
the audio rate threshold from 1 x 10
-3
to 1 x 10
-12
.
audio_rate [v]
Audio Rate. Sets the BER threshold for the error beeper to 1 x 10
-v
.
Min. Abbr. audio_rate
Arguments v: 2, 3, ..., 16
Example audio_rate 9