Filter
Top Products
Remote Commands
C-48 GB1400 User Manual
clock_freq?
Clock Frequency. Returns the CLOCK input frequency in Hz that is measured by the
Analyzer.
Min. Abbr. clock_f
Returns <NR3>, in format ddd.ddE+6
Example clock_freq? (command)
CLOCK_FREQ 700.00E+6 (response)
res_bits?
Results Bits Query. This command returns the number of bits counted, either in the
current interval so far or the previous test interval, depending on the setup of TEST
PREV and the current test state.
Min. Abbr. res_b?
Returns <NR1>
Example res_bits (command)
RES BITS 4230452921 (response)
res_cur_rate?
Results Current Rate Query. This command returns the BER measured, either in the
most recent second of the current test interval or the last second of the previous test
interval, depending on the setup of TEST PREV and the current test state.
Min. Abbr. res_c?
Returns <NR3>
Example res_cur_rate? (command)
RES_CUR_RATE 1.00E-6 (response)