Filter
Top Products
Using GPIB, RS-232
D-8 GB1400 User Manual
Using the RS-232 Interface Option
The GB1400 supports remote control through the RS-232C connector on the rear
panel The unit can be operated from the front panel and over the remote interface
simultaneously. Any unit changes made remotely are displayed on the front panel.
All of the front panel functions can be controlled over the RS-232C interface,
except “POWER.”
The remote commands sent to the GB1400 differ from front panel - the current
operating mode is entered directly rather than through sub-menus.
Commands are provided to read back stored data memory contents. Memory
contents can be read back and printed out for hardcopy archiving.
RS-232 Interface Device Settings
The RS-232C interface device settings are programmable through the front panel.
The following RS-232C parameters are programmable, along with the default
setting and other values.
Parameter Default Values
Baud, BPS rate 9600 4800, 2400, 1200, 600, 300
Parity Even None, Odd
Data Size 8 7
Echo OFF ON
XON/XOFF ON OFF
EOL CR/LF LF/CR, CR, LF
To change an RS-232C setting through the front panel.
Step 1: Press F1 to select menu mode.
Step 2: Select the RS232C menu choice.
Step 3: Select the desired setting type.
Step 4: Select the desired setting.
Step 5: Press F4 to set the selection
Step 6: Press F1 to EXIT.