Filter
Top Products
Remote Commands
C-76 GB1400 User Manual
test_prev?
Test Previous Query. Returns the current state of the test_prev command.
Min. Abbr. test_pre?
Returns [current|previous]
Example test_prev? (command)
TEST_PREV CURRENT (response)
test_print
Test Print. This command causes the Analyzer to print a Test Summary report. This
report has the same basic format and contents as an End-of-Test report. If a test is in
progress, the report will be based on current interval results. If no test is in progress, then
the report will be based on results from the previous interval and will be an End-of-Test
summary.
Min. Abbr. test_pri
Arguments none
Example test_print
test_report [eot|on_error|both|none]
Test Report. This command enables or disables End of Test and On Error reports.
Min. Abbr. test_r
Arguments eot: End-of-Test reports are enabled.
on_error: On-Error reports are enabled.
both: Both End-of-Test and On-Error
reports are enabled
none: Neither End-of-Test nor On-Error reports
are enabled.
Example test_report both