Filter
Top Products
Reference
3-4 GB1400 User Manual
Selecting (RECALLing) a Saved Word Pattern
You can recall a WORD pattern using the Generator or Analyzer RECALL
function:
8/16 bit WORD patterns are available on all instruments. Long-WORD (>16-
bits) are available only in units equipped with the 1-Mbit Option.
Use the following procedure to select (recall) a WORD pattern:
Press the WORD key to place instrument in WORD mode.
Press the RECALL key.
Press the pattern up/down keys until the desired WORD or desired mark density
pattern is displayed. Available selections will depend on the programmed WORD
buffer size.
When set to ten 64k buffers, available selections are:
WORD 0
WORD 1
……
WORD 9