Filter
Top Products
Remote Commands
C-92 GB1400 User Manual
byte_block [a], [i], [b1], ..., [bn]
Byte Block. This command overwrites a block of i bits in the edit pattern, beginning at
address a, with the overwrite pattern indicated by bytes b1 through bn.
Min. Abbr. byte_b
Arguments a <NR1>, the following ranges indicate the starting
address of the overwrite block.
0 to 131071 (1M mode)
0 to 65535 (512K mode)
0 to 32767 (256K mode)
0 to 16,383 (128K mode)
0 to 8191 (64K mode)
i <NR1>, in the range 1 to 80, the number of bits to
overwrite. 10 Bytes maximum.
b1, ..., bn <non-decimal numeric(s)> Indicating the bytes that
make up the overwrite pattern. Each byte may be in
the range #H00 to #HFF (hex), #Q000 to #Q377
(octal), or #B00000000 to #B11111111 (binary).
Example byte_block 4096, 24, #HBB, #H10, #HFF
Note: The address "a" plus the number of bytes being changed ('i'/8) must be less than
the pattern length.
Note: n of "bn" must equal 1/8.