Filter
Top Products
Functional Overview
GB1400 User Manual 2-19
GPIB Section Controls
There are two keys in the GPIB section:
• ADDR: Key used to set GPIB address in the range 0 to 30.
• LOCAL: The LED in this key indicates whether the instrument is in the
local mode (LED off) or remote mode (LED on). If the LED is on, you can
return the instrument to local mode by pressing the LOCAL key.
Note that these two keys are used only when operating the instrument via its
GPIB port. For more information on the GPIB port and remote control in general,
see the appendix. For detailed descriptions of all remote commands, see the
appendix.