Filter
Top Products
Remote Commands
C-6 GB1400 User Manual
Command Examples
The following are some typical GB1400 set and query command examples:
Command Action or Response
clock_freq? Returns the current output clock frequency setup of
the Generator or the measured input clock frequency
of the Analyzer
word_memory? Returns the saved word patterns in all 10 word
memory locations.
word_memory? 7 Returns the saved word pattern in word memory
location 7.
word memory 9, 16, #Haa, #H23 Sets the 16 bits of the word pattern stored at location
9 to the bit sequence represented by AA23
hexadecimal.
word_bits 8, #Q307 Sets the first eight bits of the current active pattern to
the bit sequence represented by 307 octal.
recall_word 7 Recalls the word pattern saved in location 7 and
makes it the current active pattern.
word_mem_len 6 , 16 Sets the length of the word pattern stored in location
6 to 16 bits.
view_angle? Returns the current display view angle setup.
view_angle 3 Sets the view angle to 3.
rs_prompt "700" Sets the terminal display prompt to "700".
all_mem? Returns the word patterns saved in all 10 word
memory locations.