Filter
Top Products
Remote Commands
C-84 GB1400 User Manual
PRINT Setup Commands
print_enable [on|| off]
Print Enable. This command turns the "master" Analyzer Print Enable parameter on or
off. When Print Enable is off, then no reports will be printed. When Print Enable is on,
then all enabled reports will be printed. Remember that individual reports will not print
unless they are enabled individually and Print Enable has been set to "on".
Min. Abbr. print_e
Arguments on enabled reports will print.
off no reports will print
Example print_enable on
print_enable?
Print Enable Query. Returns the current state of the Print Enable parameter.
Min. Abbr. print_e?
Returns [on|off]
Example print_enable? (command)
PRINT_ENABLE ON (response)
print_port [ parallel || gpib || serial ]
Print Port. This command selects the port on which all Analyzer reports will be printed.
Min. Abbr. print_p
Arguments parallel selects the rear-panel "PRINTER" port
gpib selects the rear-panel "GPIB" (IEEE-488) port.
serial selects the rear-panel "RS-232C" port.
Example print_port parallel