DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1002MAPD-BD (MAPD Interface Circuit Pack TN802)
9
Table 9-387 lists the TN802 LCD messages that you might see if installing or
servicing an IP Trunk.
Support for laptop PCs
Field technicians can access the TN802 circuit pack through:
1. ‘‘pcANYWHERE® client software’’
2. ‘‘Directly-connected keyboard, monitor, and mouse’’
pcANYWHERE
®
client software
1. Attach a male-to-male serial cable and a NULL modem connector
(if not built into the cable you use) to the COM2 connector (Note 8
in Figure 9-55
) Attach the other end to the serial port of your laptop.
2. Launch the pcANYWHERE
®
application.
3. Click on Add Remote Control Item.
4. In the Properties window, choose the communication port to which
you connected the cable in Step 1.
Table 9-387. TN802 LCD messages for IP trunks
Display Explanation
PC BOOT The TN802 MAPD PC is booting up.
IP TRK # IP Trunk application is running (# character blinks)
IML DWN # Internal error on the IP Trunk. System shuts down
and sends and error message to the board.
MSHUT # where
both MSHUT and #
are blinking
The system is in the process of shutting down due to
a front panel button press. DO NOT attempt to
remove board.
MSHUT #, where #
is blinking
The system has shut down gracefully.
Continued on next page
