DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-120format card-mem
8
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses help after entering
displaymemory-configuration
the following message will be displayed:
Error Messages
If the format memory [translation] [announcements] [coredump] maintenance
command is executed and errors occur, one of the following error messages will
be displayed:
— flash card to small for operation requested
— card is bad (reformat failed)
— card is write protected
— command cannot be executed due to command contention
— NETCON 12V programming power failure
Output
For the following output example the command format card-mem was entered.
print This parameter causes the information displayed by this command to
be sent to the printer attached to the terminal as well as to the screen.
schedule When the “schedule” option is specified, the command is validated and
then a scheduling form is displayed to allow the technician to schedule
execution of the command. The command is then placed in the
command queue and is executed at the specified time. The information
displayed by the command is sent to the system printer instead of the
screen. Refer to the Report Scheduler and System Printer feature
specification [1] for more details.
