DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-38busyout cdr-link
8
Output
For the following output example, assume that the command,
backup disk
is
entered on a duplex system.
busyout cdr-link
busyout cdr-link [primary | secondary]
The busyout cdr-link command puts a specified call detail recording link in a
maintenance busy state. When busied out, the link is dropped and must be
reestablished later when returned to service. See the description of
status link
for more information on links.
Parameters
Examples
busyout cdr-link
busy cdr secondary
For more information see the following sections at the beginning of this chapter:
Busyout and Release Commands, Common Input Parameters, and Common
Output Fields.
Processor
Identifies the processor carrier that was backed up (SPE-A, or
SPE-B).
Command
Completion Status
Results of the command, and the reason for any failure are
displayed.
[primary | secondary] This qualifier is used to specify one of the two possible links to
CDR output devices. Primary is the default.
backup disk
BACKUP DISK
Processor Command Completion Status
SPE-A Success
SPE-B Success
Command Successfully Completed
