DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1105M/T-BD (Maintenance/Test Circuit Pack)
9
Hardware Error Log Entries and Test to Clear
Values
Notes:
a. This error indicates that the circuit pack has stopped functioning. Reset
the circuit pack via busyout board UUCSS, reset board UUCSS, and
release board UUCSS commands. If the SAKI Sanity Test (#53) passes,
then the on-board circuitry is healthy. If the SAKI Sanity Test (#53) fails,
replace the circuit pack.
b. The circuit pack has been busied out via the busyout board UUCSS
command. Execute release board UUCSS command.
Maintenance/Test Board Error Log Entries
Error
Type
Aux
Data Associated Test
Alarm
Level
1
1. Major or Minor alarms on this MO may have been downgraded to Warning alarms based on the values
used in the set options command.
On/Off
Board Test to Clear Value
0
2
2. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the appropriate
test description and follow the recommended procedures.
0 Any Any Any test port UUCSSpp sh r 1
1(a) 0 SAKI Sanity Test
(#53)
MINOR ON See footnote a
18(b) 0 Busyout Board WARNING OFF release board UUCSS
36(c) 0
217(e) WARNING ON
257(d) 0 CC Loop Test (#52) MINOR ON test board UUCSS r3
267(e) WARNING ON
513(f) 4352
to
4357
769(g) 4358
1025(h) 4363 NPE Audit Test (#50) test board UUCSS l
1538(i) 0 MINOR ON
3840(j) 4096
to
4101
3999 (k) Any None
