Filter
Top Products
F-11
6.6 Speed/torque command gain and bias
6.6.1 Using two types of frequency (speed) commands
Speed setting mode selection
Reference priority selection
Speed setting mode selection #2
switching frequency
1) One frequency (speed) reference
Reference priority selection =(Default setting)
Priority is given to the reference set with .
2) Switching with input terminal (=)
Reference can be switched if the frequency priority switching function is assigned to a terminal.
has priority Frequency priority switching terminal OFF
has priority Frequency priority switching terminal ON
Ex.) When the frequency priority switching function is assigned to terminal S4.
Title Function Adjustment range Setting value
Input terminal selection #8(S4)
(Frequency reference
priority switching)
Reference priority
OFF has priority
ON has priority
Function
These parameters switch two types of frequency
Switching by parameter setting
Automatic switching by means of switching frequencies
Switching with input terminal
Frequency(speed) reference
Frequency reference