Filter
Top Products
D-4
4.1.2 How to set extended parameters
The VF-A7 inverter has extended parameters to allow you to make full use of its functions.
The code of every extended parameter is composed up of an and a 3-digit number.
[Procedure for setting an extended parameter]
You can return to the previous step by pressing the key
instead of the key.
Extended parameter
ENT
Press the Monitor key once, then press
the
or key to select a parameter
(
) from among the basic
parameters.
Select the parameter you want to
change by pressing
and
key, then press the Enter key to
display the parameter setting.
MON
MON
ENT
ENT
ENT
Press the Monitor key to switch to parameter setting
mode. ( is displayed.)
Select the parameter ( ) the code of which
is the closest to that of the
p
arameter
y
ou want to chan
g
e.
Press the Enter key to activate the selected parameter.
Select the parameter you want to change .
Press the Enter key to display the extended parameter
setting (value) you want to change.
Change the extended parameter setting (set value).
Press the Enter key to save the change.
MON
ENT