Filter
Top Products
F-13
Parameter setting
Title Function Adjustment range Default setting
Speed setting mode selection
:VI(voltage input)/II(current input)
:RR(volume/voltage input)
:RX(voltage input)
:RX2(voltage input)(optional)
:Operating panel input
:Binary/BCD input (optional)
:Common serial communication option
:Serial communication RS485
:Communication add-on cassette option
:Up/down frequency
:Pulse input #1 (optional)
Reference priority selection
:
:
: has priority
: has priority
:/ switching
(input terminal function 104)
Speed setting mode selection #2 Same as
/ switching frequency
6.6.2 Setting frequency command characteristics
VI/II reference point #1 RX2 reference point #1
VI/II reference point #1 frequency RX2 reference point #1 frequency
VI/II reference point #2 RX2 reference point #2
VI/II reference point #2 frequency RX2 reference point #2 frequency
RR reference point #1 BIN reference point #1
RR reference point #1 frequency BIN reference point #1 frequency
RR reference point #2 BIN reference point #2
RR reference point #2 frequency BIN reference point #2 frequency
RX reference point #1 Pulse reference point #1
RX reference point #1 frequency Pulse reference point #1 frequency
RX reference point #2 Pulse reference point #2
RX reference point #2 frequency Pulse reference point #2 frequency
Refer to 7.3 for details.
6.6.3 Setting torque reference characteristics
VI/II reference point #1 RX2 reference point #1
VI/II reference point #2 RX2 reference point #2
VI/II reference point #1 rate RX2 reference point #1 rate
VI/II reference point #2 rate RX2 reference point #2 rate
RR reference point #1 BIN reference point #1
RR reference point #2 BIN reference point #2
RR reference point #1 rate BIN reference point #1 rate
RR reference point #2 rate BIN reference point #2 rate
RX reference point #1
RX reference point #2
RX reference point #1 rate
RX reference point #2 rate
Refer to 6.21 for details.