Filter
Top Products
F-2
6.1.2 Putting out signals of arbitrary frequencies
Speed reach setting frequency
Speed reach detection band
Setting of reach frequency and detection frequency band
Title Function Adjustment range Default setting
Speed reach setting frequency
Speed reach detection band
Setting of output terminal parameter
Title Function Adjustment range Set value
Output terminal
selection #2
(OUT2)
: Specified speed arrival(a-contact)
or
: Specified speed arrival(b-contact)
Note) To put out signals to OUT 1, select the parameter .
1) If detection frequency band + Speed reach setting frequency < Reference frequency
2) If detection frequency band + speed reach frequency > reference frequency
Function
When the output frequency enters the frequency range delimited by the frequencies
set arbitrarily with the parameters and ( (-set frequency) +/-
(-set frequency) ), an ON or OFF signal is put out.
Speed reach setting frequency(Default setting)
P24-OUT2
Speed reach setting frequency Inverse
P24-OUT2
Output frequency [Hz]
[s]
ON
OFF
ON
OFF
0
Output frequency [Hz]
[s]
ON
OFF
Speed reach setting frequency(Default setting)
P24-OUT2
Speed reach setting frequency Inverse
P24-OUT2
ON
OFF
0