Filter
Top Products
I-7
No. Option name Function, purpose.
Parameter writer
This unit collectively reads, copies and writes setup parameters. Therefore, multiple inverters
can be set up the same by use of this unit. Storage capacity of one parameter writer is for
three inverters. (When using this unit, set as follows: F805 [common serial transmission
waiting time] = 0.00 [default setting].)
Outline drawings with dimensions
(Model: PWU001Z)
Extension control panel
Extension operation control panel unit with LED indicator, RUN/STOP key, UP/DOWN key, Monitor key and Enter key.
(When using this unit, set as follows: F805 [common serial transmission waiting time] = 0.00 [default setting].)
<Outline drawings with dimensions>
(Model: RKP001Z)
RS-232C
communication
converter unit
If this unit is used to connect the inverter and a personal computer and so on with each other, data communication can
be performed between the two besides easy adjustment of parameters, saving and writing data. This unit serves as not
only an RS-232C interface but a communication unit that can be connected with two inverters together.
Monitor function Parameter setup function Command function Added function
<Outline drawings with dimensions>
(Model: RS2001Z)
(Note)
Use a parameter writer
manufactured in January, 1997 or
after. For using a parameter writer
manufactured in December, 1996 or
before, connect it to the inverter with
cable after turning on the inverter.
<How to know date of manufacture>
Manufactured:Year Month
(Note)
Use an extension operation control panel
unit manufactured in January, 1997 or
after. Units manufactured in December,
1996 or before cannot be used. Date of
manufacture can be know by the lot
number appearing on the name plate.
<How to know date of manufacture>
Manufactured:Year Month