Filter
Top Products
F-52
2) Switching by frequencies - Automatically switching acc/dec times at certain frequencies
Title Function Adjustment range Default setting
Acceleration/deceleration switching frequency #1
[Hz]
Acceleration/deceleration switching frequency #2
[Hz]
Acceleration/deceleration switching frequency #3
[Hz]
Note) Regardless of the sequence of input of frequencies, acc/dec times are switched from #1 to #2 at the
lowest frequency, from #2 to #3 at the middle frequency and from #3 to #4 at the highest frequency.
(For example, if the frequency set with is higher than that set with , the acc/dec time #1
is selected in the frequency range below the -set frequency, while the acc/dec time #2 is
selected in the frequency range of the -set frequency to the -set frequency.)
Acceleration at the gradient of Deceleration at the gradient of
Acceleration at the gradient of Deceleration at the gradient of
Acceleration at the gradient of Deceleration at the gradient of
Acceleration at the gradient of Deceleration at the gradient of
3) Switching with terminals - Switching acc/dec times by means of external terminals
Acceleration at the gradient of Deceleration at the gradient of
Acceleration at the gradient of Deceleration at the gradient of
Acceleration at the gradient of Deceleration at the gradient of
Acceleration at the gradient of Deceleration at the gradient of
Output freq. [Hz]
time [s]0
Setting freq.
Output frequency [Hz]
Acc/dec switching #1
Acc/dec switching #2
time [s]
0