Filter
Top Products
H-2
(Continued from the preceding page)
Com.No.
Details of indication
Key operated
LED display
Description
FE10 Past trip #1
(Alternately blinking at intervals of 0.5
second) Past trip #1
FE11 Past trip #2
(Alternately blinking at intervals of 0.5
second) Past trip #2
FE12 Past trip #3
(Alternately blinking at intervals of 0.5
second) Past trip #3
FE13 Past trip #4
(Alternately blinking at intervals of 0.5
second) Past trip #4
FE14
Cumulative
operation time
Indication of total (accumulated) operation
hours(Indication of 0.1 represents 10 hours.)
Standard monitor
mode
Note 1
Running frequency indication(in operation)
Note 1: When or key is pressed, indication changes in the status monitor mode.
Note 2: Contents of status indications of *1, *2, *3, *4 and *5 can be selected from 30 kinds of information.
Unit of current and voltage indications can be changed from % to A (amperage) and V (voltage)
and vice versa respectively.
Note 3: Indicated input voltage is DC voltage just after input voltage is rectified multiplied by 1/ 2.
Note 4: Past trip is in order of 1(last)
2 3 4(oldest)
Note 5: Cumulative operation time indicates a total of actually running hours.
Information on input terminals
Information on input terminals and input terminals are for the optional add-on cassette.
Input terminal #9 to #16: Expansion TB option unit
Note) When is set at a number of to expansion TB option input terminal information (,)
indicate information of lower 8 bit terminal (B0 B7).
Input terminal #1 F :F111 :0
Input terminal #2 R :F112 :1 When there is signal input
Input terminal #3 ST :F113 :2
Input terminal #4 RES :F114 :3 When there is no signal input
Input terminal #5 S1 :F115 :4 (Blank in the upper half)
Input terminal #6 S2 :F116 :5
Input terminal #7 S3 :F117 :6
Input terminal #8 S4 :F118 :6
Input terminal #9 B8 :F119 :8 When there is signal input
Input terminal #10 B9 :F120 :9
Input terminal #11 B10 :F121 :10 When there is no signal inpu
t
input terminal #12 B11 :F122 :11 (Blank in the upper half)
Input terminal #13 B12 :F123 :12 When there is signal input
Input terminal #14 B13 :F124 :13
Input terminal #15 B14 :F125 :14 When there is no signal input
Input terminal #16 B15 :F126 :15 (Blank in the upper half)
Optional add-on cassette