Filter
Top Products
J-23
Monitor FM/AM/pulse output function selection
Communication
number
Function
Communication
unit
Monitor output
selection
Trip holding
Meter output
selection
Speed
control
Torque
control
Position
control
V/f
constant
Reference
section
0 FD00 Running frequency 0.01 [Hz] 0 (*3) 0
1 FE02 Frequency command 0.01 [Hz] 1 hold 1
2 FE03 Current 0.01 [%] 2 hold 2
3 FE04 DC voltage 0.01 [%] 3 hold 3
4 FE05 Output voltage 0.01 [%] 4 hold 4
5 FE15 After-compensation frequency 0.01 [Hz] 5 hold 5
6 FE16 Speed feedback (real-time value) 0.01 [Hz] 6 hold 6
7 FE17 Speed feedback (1 second filter) 0.01 [Hz] 7 hold 7
8 FE18 Torque 0.01 [%] 8 hold 8 (*2)
9 FE19 Torque reference 0.01 [%] 9 hold 9
10 FE56 Internal torque reference (*1) 0.01 [%] 10 hold 10
11 FE20 Torque current 0.01 [%] 11 hold 11 (*2)
12 FE21 Exciting current 0.01 [%] 12 hold 12 (*2)
13 FE22 PID feedback value 0.01 [Hz] 13 hold 13
14 FE23 Motor overload factor (OL2 data) 0.01 [%] 14 hold 14
15 FE24 Inverter overload factor (OL1 data) 0.01 [%] 15 hold 15
16 FE25 PBr overload factor (PBrOL data) 0.01 [%] 16 hold 16
17 FE28 PBr load factor (pulse duty) 0.01 [%] 17 hold 17
18 FE29 Input power 0.01 [kW] 18 hold 18
19 FE30 Output power 0.01 [kW] 19 hold 19
20 FE31 Peak output current 0.01 [%] 20 hold 20
21 FE32 Peak DC voltage 0.01 [%] 21 hold 21
22 FE33 Motor counter dummy PG 1 count 22 hold 22
23 FE34 Position pulse 1count 23 hold 23
24 FE35 PR input 0.01 [%] 24 not hold 24
25 FE36 VI/II input 0.01 [%] 25 not hold 25
26 FE37 RX input 0.01 [%] 26 not hold 26
27 FE38 RX2 input 0.01 [%] 27 not hold 27
28 FE39 FM output 0.01 [%] 28 not hold 28
29 FE40 AM output 0.01 [%] 29 not hold 29
30 FE57 Fixed output for meter adjustment 0.01 [%] hold 30
31 FE64 Analog output for communication 0.01 [%] not hold 31
32 FE60 Acc/dec torque removal 0.01 [%] not hold 32
5.4
(*1): When =7,8,9, under speed control.
(*2): Reference data
(*3): Trip frequency is displayed in another way.
For details, refer to section 5.4; [Terminal FM-related parameters].
For monitor indications, refer to section 8.2; [Set up values of monitor indication parameters].
Communication number 31(Analog output for communication) outputs analog data of FA51.
Sensorless vector/vector with sensor : valid, : invalid