Filter
Top Products
C-12
2) Torque setting by means of current signals (4 to 20 mAdc)
Current signals 4 20 mAdc
Set the torque reference selection at (VI/II input).)
3) Torque setting by means of voltage signals (0~10 Vdc)
Voltage signal 0 10Vdc
Set the torque reference selection parameter at (RR signal input).
Torque setting by means of voltage signals (0~10 Vdc)
voltage signals 0-10Vdc
Set the torque reference selection at (VI/II input).
Torque setting by means of a volume control
[Parameter setting]
Set the torque reference selection parameter at (RR signal input).
Voltage signal
Torque command by means of voltage
signals (0 to 10 Vdc)
Motor torque
100%
0
0Vdc
10Vdc
Motor torque
100%
0
0Vdc
10Vdc
Voltage signal
Torque command by means of voltage signals
(0 to 10 Vdc)
100%
Motor torque
0
4mAdc
20mAdc
Current signal
Torque command by means of current signals
(4 to 20 mAdc)
Potentiometer
Motor torque
100%
0
MIN MAX
volume
Torque command by means of a volume
control.
It is necessary to change the setting of the VI/II input point 1 setting parameter
.