Filter
Top Products
F-5
[: terminal board has priority (Enabled)]
Priority is given to commands entered from the terminal board even in control panel operation
mode.
Priority command from terminal board (Operation command)
Jog run input terminal function 18/19
Injection braking input terminal function 22/23 (*1)
Forced jog run(forward) input terminal function 50/51 (*1)
Forced jog run(reverse) input terminal function 52/53 (*1)
(*1)These settings are invalid when the control panel stop pattern parameter is set at .
An example of switching to jog run in control panel operation mode
[Incase that terminals S4 and CC are assigned to jog run]
Assign the control terminal S4 (default: 16 (preset-speed #4)) to jog run.
Title Function Adjustment range Setting value
Input terminal selection #8 (S4)
(Jog run)
Command from the control panel
(=)
Internal command
A: No command from the terminal board.
A: Command from the terminal board.
ST-CC
S4-CC
(Jog run)
Output frequency[Hz]
Forward
Forward
Reference
Panel key
Command from the terminal board