Filter
Top Products
H-3
Information on output terminals
Information on output terminals and output terminals are for the optional add-on cassette.
Type of connected option
Note1) Connection of add-on cassette options are reflected in this display.
Note2) Connection of PG feedback boards are not in this display.
Total (accumulated) operation hours
For indication of total operation hours, running hours are counted up when the output frequency
monitor reads a frequency other than 0.0 Hz. 10 hours is indicated as 0.1 (unit of indication). Total
hours is indicated in the range from "" to "" that represent 10 hours and 9999 hours
respectively.
Output terminal #1 OUT1 :F130 :1 When there is signal output
Output terminal #2 OUT2 :F131 :2
Output terminal #3 FL :F132 :3 When there is no signal output
blank in the upper half
Error code output #0 ALM0 :8 When there is signal input
Error code output #1 ALM1 :9
Error code output #2 ALM2 :10 When there is no signal input
Error code output #3 ALM3 :11 blank in the upper half
Error code output #0,1,2,3 : Vector option unit
Output terminal #4 R1 :F133 :4 When there is signal output
Output terminal #5 R2 :F134 :5
Output terminal #6 OUT3 :F135 :6 When there is no signal output
Output terminal #7 OUT4 :F136 :7 blank in the upper half
Output terminal #4,5 : Expansion TB option unit
Output terminal #6,7 : Vector option unit
O
p
tional add-on cassette
Expansion TB option unit
Vector option unit
Expansion TB option unit & Vector option unit( )
F10M option unit
S20 option unit