Filter
Top Products
F-51
6.23.2 Switching of acceleration/deceleration #1, 2, 3 and 4
Acceleration time #2 Acceleration time #4
Deceleration time #2 Deceleration time #4
Acc/dec #1,2,3,4 selection Acc/dec switching frequency #3
Acc/dec switching frequency #1 Acc/dec pattern #2
Acceleration time #3 Acc/dec pattern #3
Deceleration time #3 Acc/dec pattern #4
Acc/dec switching frequency #2
Title Function Adjustment range Default setting
Acceleration time #2
() [s]
Model dependent
Deceleration time #2
() [s]
Model dependent
Acc/dec time #1, 2, 3, 4
selection
: Acc/dec #1, : Acc/dec #2,
: Acc/dec #3, : Acc/dec #4
Acceleration time #3
() [s]
Model dependent
Deceleration time #3
() [s]
Model dependent
Acceleration time #4
() [s]
Model dependent
Deceleration time #4
() [s]
Model dependent
) Selection with parameters
The acceleration/deceleration time selection parameter has been set at 1 by default. The setting
of can be changed from to , or . (The setting of is valid when is
set at 1.)
Function
With these parameters, you can set 4 acceleration and deceleration times. Acceleration
and deceleration times can be selected or switched by any of the following 3 method:
1) Selection with parameters
2) Switching by means of frequencies
3) Switching with terminals
time [s]
Output frequency [Hz]