Filter
Top Products
I-12
9. 6 Board options
Besides the optional add-on cassettes, such the board options as shown below are prepared for
the inverter VF-A7.
Table of board options
Option name Function, purpose Model Remarks
VEC002Z
(For complementary / open
collector type encoder)
PG feedback
board
Since this option is compatible to
vector option unit, it can be used
for speed control and torque
control by the PG feedback
function.
VEC003Z
(For line driver type encoder)
Cannot be
used together
with any
optional add-on
cassettes.
Functions of board options
Vector option unit
(optional add-on cassette)
PG feedback board
(board option)
Model
VEC001Z VEC002Z VEC003Z
Vector control with sensor
Speed controlled operation
(150 % torque at zero speed, speed control range: 1:1000 [1000 ppr PG],
speed accuracy: 0.02 % [50 Hz, basic digital input])
Torque controlled operation
(torque control accuracy: 10 % [torque control range: -100 to +100 %])
Position control command operation
Available(pulse command) Unavailable Unavailable
PG system
Line driver system
(equivalent to 26LS31)
Complementary system
Open collector system
Complementary system
Open collector system
Line driver system
(equivalent to 26LS31)
Maximum frequency of input pulse
60 kHz(2-phase), 120 kHz(single phase)
Maximum frequency is restricted depending on kind of encoder and wiring distance.
Pulse duty: 50 10 %
Length of PG wiring 100 m
(complementary system)
100 m
(complementary system)
30 m
Power supply for PG
5 V, 6 V, 12 V, 15 V
(switchable), 160 mAdc
12 V (fixed), 160 mAdc 5 V (fixed), 160 mAdc
Voltage drop compensation
for PG power supply
Available Unavailable Unavailable
Sensor disconnection
detection/in running (in rotation)
Available Available Available
Sensor disconnection
detection/in suspension
Available
(line driver system only)
Unavailable Unavailable
10 V analog command input
Available Unavailable Unavailable
Multifunction programmable output 2 circuits (sink/source switchable)
Unavailable Unavailable
Alarm output
4 circuits (sink/source switchable)
Unavailable Unavailable
Terminal board
Detachable terminal board
(Phoenix)
+ connector for VFV3 sensor
Fixed terminal board (Phoenix)
(equivalent to VFS7E control
terminal board)
Fixed terminal board (Phoenix)
(equivalent to VFS7E control
terminal board)
PG wiring
Connector wiring
(connector for VFV3 sensor)
Screw terminal Screw terminal
Connection with other add-
on cassette option
Available Unavailable Unavailable
Remarks
(applied motor, expected)
VFV3 motor/standard
motor with sensor
Standard motor with sensor
VFV3 motor
Installation of board option
For installing a board option, fit the bracket to the right side of the inverter and plug the
connector of the option board into the connector jack of the control board.
BracketBoard option
Connector