Filter
Top Products
6
Removal and reinstallation of the cover
1.3 Removal and reinstallation of the cover
1.3.1 Front cover
1.3.2 Wiring cover
Removal and reinstallation
The cover can be removed easily by pulling. To reinstall, fit the cover to the drive unit along the guides.
Removal (Example of FR-E720EX-0.75K)
Remove the front cover by pulling in the direction of arrow.
Reinstallation (Example of FR-E720EX-0.75K)
To reinstall, match the cover to the drive unit front and install it straight.
NOTE
Fully make sure that the front cover has been reinstalled securely.
The same serial number is printed on the capacity plate of the front cover and the rating plate of the drive unit. Since
these plates have the same serial numbers, always reinstall the removed cover onto the original drive unit.
Example of FR-E720EX-0.75K
Wiring cover
Guide