Filter
Top Products
LAN Configuration
116
ProSecure Unified Threat Management (UTM) Appliance
Figure 61.
3. Select the radio button next to the group name that you want to edit.
4. Type a new name in the field. The maximum number of characters is 15; spaces and double
quotes (") are not allowed.
5. Repeat Step 3 and Step 4 for any other group names.
6. Click Apply to save your settings.
Set Up Address Reservation
When you specify a reserved IP address for a computer or device on the LAN (based on the
MAC address of the device), that computer or device always receives the same IP address
each time it accesses the UTM’s DHCP server. Reserved IP addresses should be assigned
to servers or access points that require permanent IP address settings. The reserved IP
address that you select needs to be outside of the DHCP server pool.
To reserve an IP address, select Reserved (DHCP Client) from the IP Address Type
drop-down list on the LAN Groups screen as described in Add Computers or Devices to the
Network Database on page 114 or on the Edit Groups and Hosts screen as described in
Modify Computers or Devices in the Network Database on page 114.
Note: The reserved address is not assigned until the next time the
computer or device contacts the UTM’s DHCP server. Reboot the
computer or device, or access its IP configuration and force a DHCP
release and renew.