Filter
Top Products
Default Settings and Technical Specifications
672
ProSecure Unified Threat Management (UTM) Appliance
Wireless radio and access point settings (UTM9S and UTM25S only)
Wireless radio Enabled
Region Nonconfigurable: set for the region in
which you purchased the UTM.
Country The selection is limited to the countries in
the region in which you purchased the
UTM. The default settings are:
• Africa. Algeria
• Asia. Azerbaijan
• Europe. Albania
• Middle East. Bahrain
• North America, Latin America, and The
Caribbean. United States
• Oceania. Australia
Operating frequency 2.4 GHz or 5 GHz
Default security profile netgear-1
Default network name (SSID) UTM9S or UTM25S
Broadcast SSID Enabled
Security Open
Encryption None
Authentication None
Default transmit power Full
802.11 wireless mode g and b (for most countries)
802.11b/g/n radio frequency channel Auto
802.11n channel spacing 20 MHz
Beacon interval 100 ms
DTIM interval 2
RTS threshold 2346 bytes
Fragmentation threshold 2346 bytes
Preamble mode Long
Protection mode None
Power save Disabled
Table 193. UTM default configuration settings (continued)
Feature Default behavior