Filter
Top Products
Use the Setup Wizard to Provision the UTM in Your Network
47
ProSecure Unified Threat Management (UTM) Appliance
Use the Setup Wizard to Perform the Initial Configuration
• Setup Wizard Step 1 of 10: LAN Settings
• Setup Wizard Step 2 of 10: WAN Settings
• Setup Wizard Step 3 of 10: System Date and Time
• Setup Wizard Step 4 of 10: Services
• Setup Wizard Step 5 of 10: Email Security
• Setup Wizard Step 6 of 10: Web Security
• Setup Wizard Step 7 of 10: Web Categories to Be Blocked
• Setup Wizard Step 8 of 10: Email Notification
• Setup Wizard Step 9 of 10: Signatures & Engine
• Setup Wizard Step 10 of 10: Saving the Configuration
The Setup Wizard facilitates the initial configuration of the UTM by taking you through 10
screens, the last of which allows you to save the configuration. If you prefer to perform the
initial WAN setup manually, see Chapter 3, Manually Configure Internet and WAN Settings.
To start the Setup Wizard:
1. Select Wizards from the main navigation menu. The Welcome to the Netgear
Configuration Wizard screen displays:
Figure 25.
2. Select the Setup Wizard radio button.
3. Click Next. The first Setup Wizard screen displays.
The following sections explain the 9 configuration screens of the Setup Wizard. On the 10th
screen, you can save your configuration.
The tables in the following sections explain the buttons and fields of the Setup Wizard
screens. Additional information about the settings in the Setup Wizard screens is provided in
other chapters that explain manual configuration; each of the following sections provides a
specific link to a section in another chapter.