Filter
Top Products
Virtual Private Networking Using SSL Connections
366
ProSecure Unified Threat Management (UTM) Appliance
Configure the Client IP Address Range
First determine the address range to be assigned to VPN tunnel clients, and then define the
address range.
To define the client IP address range:
1. Select VPN > SSL VPN > SSL VPN Client. The SSL VPN Client screen displays:
Figure 219.
2. Select the check box and complete the fields as explained in the following table:
Table 95. SSL VPN Client screen settings
Setting Description
Client IP Address Range
Enable Full Tunnel Support Select this check box to enable full-tunnel support. If you leave this check
box cleared (which is the default setting), full-tunnel support is disabled but
split-tunnel support is enabled, and you need to add client routes (see Add
Routes for VPN Tunnel Clients on page 367).
Note: When full-tunnel support is enabled, client routes are not operable.
DNS Suffix A DNS suffix to be appended to incomplete DNS search strings. This setting
is optional.