Filter
Top Products
Virtual Private Networking Using IPSec, PPTP, or L2TP Connections
317
ProSecure Unified Threat Management (UTM) Appliance
Note: The IKE policy settings that are explained in the following table are
specifically for a Mode Config configuration. Table 72 on page 296
explains the general IKE policy settings.
Table 78. IKE policy settings for a Mode Config configuration
Setting Description
Mode Config Record
Do you want to use
Mode Config Record?
Select the Yes radio button.
Note: Because Mode Config functions only in Aggressive mode, selecting the Yes
radio button sets the tunnel exchange mode to Aggressive mode. Mode Config
also requires that both the local and remote endpoints are defined by their FQDNs.
Select Mode
Config Record
From the drop-down list, select the Mode Config record that
you created in Step 4 on page 315. This example uses NA
Sales.
General
Policy Name A descriptive name of the IKE policy for identification and management purposes.
This example uses ModeConfigNA_Sales.
Note: The name is not supplied to the remote VPN endpoint.
Direction / Type Responder is automatically selected when you select the Mode Config record in
the Mode Config Record section of the screen. This ensures that the UTM
responds to an IKE request from the remote endpoint but does not initiate one.
Exchange Mode Aggressive mode is automatically selected when you select the Mode Config
record in the Mode Config Record section of the screen.
Local
Select Local Gateway
(multiple WAN port
models only)
Select a WAN interface from the drop-down list to specify the WAN interface for the
local gateway.
Identifier Type From the drop-down list, select FQDN.
Note: Mode Config requires that the UTM (that is, the local endpoint) is defined by
an FQDN.
Identifier Enter an FQDN for the UTM. This example uses router.com.
Remote
Identifier Type From the drop-down list, select FQDN.
Note: Mode Config requires that the remote endpoint is defined by an FQDN.
Identifier Enter the FQDN for the remote endpoint. This needs to be an
FQDN that is not used in any other IKE policy. This example
uses client.com.