Filter
Top Products
Network and System Management
458
ProSecure Unified Threat Management (UTM) Appliance
3. Click Apply to save your settings.
Note: If you select the default NTP servers or if you enter a custom server
FQDN, the UTM determines the IP address of the NTP server by
performing a DNS lookup. Before the UTM can perform this lookup,
you need to configure a DNS server address on the WAN ISP
Settings screen of the single WAN port models or on one of the WAN
ISP Settings screens of the multiple WAN port models (see Manually
Configure the Internet Connection on page 75.)
Connect to a ReadyNAS and Configure Quarantine
Settings
• Log Storage
• Connect to a ReadyNAS
• Configure the Quarantine Settings
The UTM can quarantine questionable emails (including spam), attachments, objects, and
web files. This requires an increasing amount of storage space, which is not available on the
UTM. To accommodate these storage requirements, you need to connect the UTM to a
NETGEAR ReadyNAS and configure the quarantine settings. Without integration with a
ReadyNAS, you cannot use the quarantine options of the UTM.
You can select to quarantine emails, attachments, objects, and web files on one or more of
the following screens:
• Email Anti-Virus screen (see Customize Email Antivirus and Notification Settings on
page 196)
• Distributed Spam Analysis screen (see Configure Distributed Spam Analysis on page 207)
• Malware Scan screen (see Configure Web Malware or Antivirus Scans on page 216)
• FTP screen (Configure FTP Scanning on page 238)
NTP Server (default or
custom)
(continued)
Server 1 Name / IP Address Enter the IP address or host name of the primary
NTP server.
Server 2 Name / IP Address Enter the IP address or host name of the backup
NTP server.
Table 111. System Date & Time screen settings (continued)
Setting Description