Filter
Top Products
Wireless Network Module for the UTM9S and UTM25S
601
ProSecure Unified Threat Management (UTM) Appliance
Figure 347.
3. Select the Enable WMM check box.
4. Click Apply to save your settings.
5. In the DSCP to Queue table, from the drop-down lists, select a WMM queue for each DSCP
value that you want to use in a QoS profile:
• 4. The highest priority queue with minimum delay.
• 3. The second highest priority queue with low delay.
• 2. The medium priority queue with medium delay.
• 1. The low priority queue with high throughput.
6. Click Apply to save your settings.