NETGEAR UTM5EW-100NAS Router User Manual


 
xDSL Network Module for the UTM9S and UTM25S
553
ProSecure Unified Threat Management (UTM) Appliance
5. Click Apply to save your settings.
Automatically Detecting and Connecting the xDSL
Internet Connection
To set up your UTM9S or UTM25S for secure Internet connections, the web management
interface provides the option to detect the network connection and configure the xDSL port
automatically. You can also manually configure the Internet connection and port (see
Manually Configure the xDSL Internet Connection on page 556).
To configure the WAN port automatically for connection to the Internet:
1. Select Network Config > WAN Settings. The WAN screen displays.
Figure 322.
The xDSL network module is installed in one of the two slots (SLOT-1 or SLOT-2). The
WAN Settings table displays the following fields:
WAN. The WAN or DSL interface.
Status. The status of the WAN or DSL interface (UP or DOWN).
WAN IP. The IP address of the WAN or DSL interface.
Failure Detection Method. The failure detection method that is active for the WAN or
DSL interface. The following methods can be displayed:
- None
- WAN DNS (WAN DNS servers)
- Custom DNS (the IP address of the configured DNS server is displayed)
- Ping (the configured IP address is displayed)
VPI The virtual path identifier (VPI) that is used for the VDSL connection.
VCI The virtual channel identifier (VCI) that is used for the VDSL connection.
Table 140. xDSL settings (continued)
Setting Description