Monitor System Access and Performance
489
ProSecure Unified Threat Management (UTM) Appliance
available wireless access point, and has a Wireless Statistics option arrow in the upper right
of the screen.)
Figure 282.
The UTM9S and UTM25S also show a table with available access points at the bottom of the
Network Status screen:
Figure 283.
The following table explains the fields of the Network Status screen:
Table 124. Network Status screen fields
Item Description
LAN (VLAN) Information
For each of the LAN ports, the screen shows the IP address and subnet mask. For more detailed information,
see Table 127 on page 495.
WAN Information
For each of the WAN ports, the screen shows the IP address, subnet mask, and status of the port (UP or
DOWN). For the UTM9s and UTM25S, the screen also shows this information for the xDSL (SLOT-1 or SLOT-2)
and USB ports. For more detailed information, see Table 127 on page 495.
Available Access Points Table
Note: This information is displayed for the UTM9S and UTM25S only.