Filter
Top Products
Virtual Private Networking Using IPSec, PPTP, or L2TP Connections
268
ProSecure Unified Threat Management (UTM) Appliance
Figure 153.
The VPN Wizard default values screen lists some incorrect default values. The correct
values are listed in the following table.
Table 61. IPSec VPN Wizard default values for a gateway-to-gateway tunnel
Setting Default Value
IKE policy
Exchange mode Main
ID type IP address or FQDN
Local WAN ID Local WAN IP address or FQDN
Remote WAN ID Remote WAN IP address or FQDN
Encryption algorithm 3DES
Authentication algorithm SHA-1
Authentication method Pre-shared Key
Key group DH-Group 2 (1024 bit)
Life time 8 hours
VPN policy
Encryption algorithm 3DES
Authentication algorithm SHA-1
Life time 1 hour