Filter
Top Products
Content Filtering and Optimizing Scans
237
ProSecure Unified Threat Management (UTM) Appliance
Configure the SSL Settings for HTTPS Scanning
To configure the SSL settings for HTTPS scanning:
1. Select Application Security > SSL Settings > SSL Settings. The SSL Settings screen
displays.
Figure 131.
2. Enter the settings as explained in the following table:
3. Click Apply to save your settings.
Table 52. SSL Settings screen settings
Setting Description
SSL 3rd Party Website Certificate Handling
Select the Allow the device to present the website to the client check box to allow a Secure Sockets
Layer (SSL) connection with a valid certificate that is not signed by a trusted certification authority (CA).
The default setting is to block such a connection.
SSL Settings
Select the Allow the device to handle SSL connections using SSLv2 check box to allow HTTPS
connections using SSLv2, SSLv3, or TLSv1. If this check box is cleared, the UTM allows HTTPS
connections using SSLv3 or TLSv1, but not using SSLv2.