Filter
Top Products
Manually Configure Internet and WAN Settings
92
ProSecure Unified Threat Management (UTM) Appliance
To configure DDNS:
1. Select Network Config > Dynamic DNS. The Dynamic DNS screen displays (see the
following figure).
The WAN Mode section onscreen reports the currently configured WAN mode (for
example, Single Port WAN1, Load Balancing, or Auto Rollover). Only those options that
match the configured WAN mode are accessible onscreen.
2. Click the submenu tab for your DDNS service provider:
• Dynamic DNS for DynDNS.org (which is shown in the following figure)
• DNS TZO for TZO.com
• DNS Oray for Oray.net
• 3322 DDNS for 3322.org
Figure 51.
3. Click the Information option arrow in the upper right of a DNS screen for registration
information.