Filter
Top Products
Content Filtering and Optimizing Scans
239
ProSecure Unified Threat Management (UTM) Appliance
3. Click Apply to save your settings.
Configure FTP Content Filtering
To configure the FTP filters:
1. Select Application Security > FTP > FTP Filters. The FTP Filters screen displays:
Figure 133.
2. Enter the settings as explained in the following table:
Scan Exception
The default maximum size of the file or object that is scanned is 2048 KB, but you can define a maximum
size of up to 10240 KB. However, setting the maximum size to a high value might affect the UTM’s
performance (see Performance Management on page 428).
From the drop-down list, select one of the following actions to be taken when the file or message exceeds
the maximum size:
• Skip. The file is not scanned but skipped, leaving the end user vulnerable. This is the default setting.
• Block. The file is blocked and does not reach the end user.
Table 53. Anti-Virus screen settings for FTP (continued)
Setting Description