Filter
Top Products
Virtual Private Networking Using IPSec, PPTP, or L2TP Connections
286
ProSecure Unified Threat Management (UTM) Appliance
4. Click Apply to use the new settings immediately, and click Save to keep the settings for
future use.
Configure the Global Parameters
To specify the global parameters:
1. Click Global Parameters in the left column of the Configuration Panel screen. The
Global Parameters pane displays in the Configuration Panel screen.
Figure 170.
2. Specify the default lifetimes in seconds:
• Authentication (IKE), Default. The default lifetime value is 3600 seconds. Change
this setting to 28800 seconds to match the configuration of the UTM.
• Encryption (IPSec), Default. The default lifetime value is 1200 seconds. Change this
setting to 3600 seconds to match the configuration of the UTM.
3. Click Apply to use the new settings immediately, and click Save to keep the settings for
future use.
The UTM configuration is now complete.