Filter
Top Products
Virtual Private Networking Using IPSec, PPTP, or L2TP Connections
277
ProSecure Unified Threat Management (UTM) Appliance
Figure 160.
3. Select the A router or a VPN gateway radio button, and click Next. The VPN tunnel
parameters wizard screen (screen 2 of 3) displays.
Figure 161.
4. Specify the following VPN tunnel parameters:
• IP or DNS public (external) address of the remote equipment. Enter the remote IP
address or DNS name of the UTM. For example, enter 10.34.116.22.
• Preshared key. Enter the pre-shared key that you already specified on the UTM. For
example, enter I7!KL39dFG_8.
• IP private (internal) address of the remote network. Enter the remote private IP
address of the UTM. For example, enter 192.168.1.0. This IP address enables
communication with the entire 192.168.1.x subnet.
5. Click Next. The Configuration Summary wizard screen (screen 3 of 3) displays.