Filter
Top Products
Virtual Private Networking Using IPSec, PPTP, or L2TP Connections
332
ProSecure Unified Threat Management (UTM) Appliance
To enable the PPTP server and configure the PPTP server pool, authentication, and
encryption:
1. Select VPN > PPTP Server. The PPTP Server screen displays:
Figure 199.
2. Enter the settings as explained in the following table:
Table 84. PPTP Server screen settings
Setting Description
PPTP Server
Enable PPTP Server To enable the PPTP server, select the Enable check box. Complete the
following fields:
Start IP Address Type the first IP address of the address pool.
End IP Address Type the last IP address of the address pool. A maximum of
six contiguous addresses can be part of the pool. (The first
address of the pool cannot be assigned to a user.)
User time out Enter the time-out period in seconds, from 300 to 1800
seconds. If there is no traffic from a user, the connection is
disconnected after the specified period.