Filter
Top Products
3G/4G Dongles for the UTM9S and UTM25S
608
ProSecure Unified Threat Management (UTM) Appliance
Configure the 3G/4G Settings
The 3G/4G settings are automatically detected. Modifying these settings is required only if
you cannot connect to your ISP. For example, if your ISP provides you information about a
pay plan for the 3G/4G service, you might need to configure the 3G/4G settings.
To configure the 3G/4G settings:
1. Select Network Config > WAN Settings. The WAN screen displays (see Figure 348 on
page 605).
2. Click the Edit button in the Action column of the USB interface. The USB ISP Settings
screen displays (see Figure 349 on page 605).
3. Click the 3G/4G Settings option arrow in the upper right of the screen. The 3G/4G
Settings screen displays:
Figure 351.