Filter
Top Products
Monitor System Access and Performance
467
ProSecure Unified Threat Management (UTM) Appliance
Figure 273.
6. Enter the settings as explained in the following table:
7. Click Test to ensure that the connection to the server and email address succeeds.
8. Click Apply to save your settings.
Configure and Activate System, Email, and Syslog Logs
You can configure the UTM to log system events such as a change of time by an NTP server,
secure login attempts, reboots, and other events. You can also send logs to the administrator
or schedule logs to be sent to the administrator or to a syslog server on the network. In
addition, the Email and Syslog screen provides the option to selectively clear logs.
Table 115. Email Notification screen settings
Setting Description
Show as Mail Sender A descriptive name of the sender for email identification purposes. For
example, enter UTMnotification@netgear.com.
SMTP Server The IP address and port number or Internet name and port number of your
ISP’s outgoing email SMTP server. The default port number is 25.
Note: If you leave this field blank, the UTM cannot send email notifications.
This server requires
authentication
If the SMTP server requires authentication, select the This server requires
authentication check box, and enter the user name and password.
User Name The user name for SMTP server authentication.
Password The password for SMTP server authentication.
Send Notifications to Admin The email address to which the notifications should be sent. Typically, this is
the email address of the administrator.