Filter
Top Products
1. Installation
1 - 6
[4] Do not use the unit with the cable submerged in oil or
water.
(Refer to right drawing.)
[5] Make sure that oil and water do not flow along the cable
into the motor or detector. (Refer to right drawing.)
[6] When installing on the top of the shaft end, make sure
that oil from the gear box, etc., does not enter the
servomotor. The servomotor does not have a waterproof
structure.
Cover
Oil water
<Fault> Capillary tube phenomenon
Servomotor
<Fault> Respiration
Cover
Servomotor
Servomotor
Gear
Lubricating oil