Filter
Top Products
5. Spindle Adjustment
5 - 59
No. Abbr. Parameter name Details Setting range
3061 spdiv1 Magnification for time constant changeover speed 1
3062 spdiv2 Magnification for time constant changeover speed 2
3063 spdiv3 Magnification for time constant changeover speed 3
3064 spdiv4 Magnification for time constant changeover speed 4
3065 spdiv5 Magnification for time constant changeover speed 5
3066 spdiv6 Magnification for time constant changeover speed 6
3067 spdiv7 Magnification for time constant changeover speed 7
Set the acceleration/deceleration time
constant in the spindle synchronization
multi-step acceleration/deceleration
changeover speed sptc (N) to sptc
(N+1) range.
Set the time that the spindle speed
accelerates from 0 to slmit as a
magnification in respect to the spindle
synchronization
acceleration/deceleration time
constant (spt).
When spdiv7 is set, the range is sptc7
to slimit.
0 to 127