Filter
Top Products
Revision History
Date of revision Manual No. Revision details
June. 2004
BNP-B2365∗
First edition created.
Mar. 2004 BNP-B2365A
• Connection of power supply was fully revised.
• Wiring of the motor brake was fully revised.
• Peripheral control wiring was fully revised.
• "Setup" was fully revised.
• D/A output specifications for spindle drive unit were revised.
• Spindle control signal was revised.
• Adjusting the acceleration/deceleration operation was revised.
• Adjusting the orientation control was revised.
• Adjusting the C-axis control was revised.
• List of alarms was revised.
• List of warnings was revised.
• Miswrite is corrected.
Feb. 2006 BNP-B2365B
• Adjusting the acceleration/deceleration operation was revised.
• Troubleshooting "3B" and "77" were revised.
• Miswrite is corrected.