Filter
Top Products
3. Setup
3 - 9
Setting for full-closed loop control
High-gain specifications
No.
Abbr
ev.
Parameter name
Explanation
F E D C B A 9 8 7 6 5 4 3 2 1 0
aflt zrn2 afse ovs lmc omr zrn3 vfct upc vcnt
bit
Meaning when "0" is set Meaning when "1" is set
6 zrn3
ABZ phase scale: Set to "1" to fix Z-phase detection edge.
Absolute position scale: Set to "1" in using AT342/343,
LC191M/491M.
SV027 SSF1
Servo function
selection 1
F E D C B A 9 8 7 6 5 4 3 2 1 0
pabs rabs
bit Meaning when "0" is set Meaning when "1" is set
1 rabs
Normal setting Rotary axis machine end absolute
position control
SV081 SPEC2*
Servo function
selection 2
Parameters with an asterisk * in the abbreviation, such as PC1*, are validated with the NC power turned ON again.